کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1396762 | 984193 | 2007 | 14 صفحه PDF | دانلود رایگان |
The relationships between structure and properties have been established for isotactic polypropylene, iPP, homopolymers synthesized by metallocene catalyst systems. These iPPs exhibit different isotacticity degrees and molecular weights, and several thermal treatments during their processing have been applied. The most important factor affecting the structure and properties of these polymers is the isotacticity content. The thermal treatment, i.e., the rate of cooling from the melt, is also important and a clear molecular weight effect has been also found for the sample with lowest Mw. These factors affect the thermal properties, the degree of crystallinity and, therefore, the structural parameters and the viscoelastic behavior. A slow cooling from melt favors the formation of the γ phase instead of the α modification. The storage modulus, Young modulus and microhardness values increase as crystallinity does, independently of the origin of this increase: higher isotacticity or application of a slow crystallization from the melt.
Journal: European Polymer Journal - Volume 43, Issue 6, June 2007, Pages 2357–2370