Discrete laser spot transformation hardening of AISI O1 tool steel using pulsed Nd:YAG laser

Discrete laser spot transformation hardening is a process that creates isolated laser hardening spots, usually distributed in a certain pattern, on a component surface, covering only a fraction of the surface region that is being treated. The process offers several unique advantages for tribological applications, including improved lubrication conditions and wear performance and increased productivity. However, very limited information is available on the appropriate selection of processing parameters to achieve optimal results. In this paper, discrete laser spot hardening of AISI O1 tool steel has been studied using a pulsed Nd:YAG laser. Effect of various laser processing parameters, including laser pulse energy, pulse duration and defocus distance, on characteristics of the laser treated spots are investigated. Maps are experimentally established for processing parameter selections in discrete laser spot transformation hardening of the AISI O1 tool steel. Results show that the maximum diameter and depth of transformation hardening zones with no surface melting increase with the increase of laser pulse energy. However, they are not markedly affected by laser pulse duration. On the other hand, longer pulse durations at a given pulse energy reduce the size of softening zone surrounding the central hardening zone and are thus more favourable for most practical applications. Short laser pulse durations below 8 ms tend to produce shallower hardening zones and are not recommended for wear applications.

Research highlights
► Discrete laser spot hardening of tempered AISI O1 steel using a pulsed Nd:YAG laser.
► Effects of laser pulse energy, pulse duration and defocus distance are investigated.
► Processing parameter maps are experimentally established.
► Use laser pulse durations greater than 8 ms for optimal hardening effects.