کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1660717 | 1008410 | 2009 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of WC addition on structure and hardness of electrodeposited Ni–W
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Nickel–tungsten/tungsten carbide composites (Ni–W/WC) are fabricated by co-electrodeposition. Processing parameters including current density, particle content, and particle size are found to influence surface morphology and consequently the apparent hardness of the co-deposits. A cathodic current density below 0.2 A/cm2 and solid loading between 1 and 2 g/l are essential for providing deposits with non-porous and uniform structure. The use of 0.5 µm tungsten carbide particles and a current density of 0.1 A/cm2 results in a Ni–W/WC composite of fine and dense nodular structure with hardness of about 10 GPa, exceeding those of nanocrystalline nickel–tungsten alloys and comparable to that of hard chromium coating.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 203, Issue 23, 25 August 2009, Pages 3590–3594
Journal: Surface and Coatings Technology - Volume 203, Issue 23, 25 August 2009, Pages 3590–3594
نویسندگان
Yuttanant Boonyongmaneerat, Kanokwan Saengkiettiyut, Sawalee Saenapitak, Supin Sangsuk,