Assessment of radiological hazard of commercial granites from Extremadura (Spain)

• 40K content in granite increased with alkaline feldspar and decreased with plagioclase.
• Radioactive content was higher in granite s.s., followed by granodiorite and diorite.
• The surface exhalation rate increased with roughness of granite with mechanical finishes.
• Thermal finish of granite presented the highest exhalation rate due to high temperature applied.

The term “commercial granite” comprises different natural stones with different mineralogical components. In Extremadura, western Spain, “commercial granites” can be classified in three types: granite s.s. (sensus stricti), granodiorite, and diorite. The content of naturally occurring radionuclides depended of the mineralogy. Thus, the 40K content increased as the relative content of alkaline feldspar increased but decreased as the plagioclase content increased. The radioactive content decreased in the following order: granite s.s. > granodiorite > diorite. In this work, the radiological hazard of these granites as building material was analyzed in terms of external irradiation and radon exposure. External irradiation was estimated based on the “I” index, ranged between 0.073 and 1.36. Therefore, these granites can be use as superficial building materials with no restriction. Radon exposure was estimated using the surface exhalation rates in polished granites. The exhalation rate in granites depends of their superficial finishes (different roughness). For distinct mechanical finishes of granite (polish, diamond sawed, bush-hammered and flamed), the surface exhalation rate increased with the roughness of the finishes. Thermal finish presented the highest exhalation rate, because the high temperatures applied to the granite may increase the number of fissures within it. The exhalation rates in polished granites varied from 0.013 to 10.4 Bq m−2 h−1.