کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5027966 | 1470643 | 2017 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Numerical Prediction of the Forming Limit Diagrams of Thin Sheet Metal using SPIF Tests
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper aims to predict numerically the forming limit diagram using the 3D simulations of the micro-Marciniak tests with different width. A conventional Lemaitre ductile damage model with isotropic hardening is used to predict the strain hardening and the necking point. The identification of the ductile damage model is first performed from micro-single point incremental forming tests using inverse finite element method. Then, the micro-forming limit curves in terms of strain and stress are plotted in the major/minor strain space and major/minor stress space, respectively. Finally, the effect of the initial grain size on the forming limit curves is investigated.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia Engineering - Volume 183, 2017, Pages 113-118
Journal: Procedia Engineering - Volume 183, 2017, Pages 113-118
نویسندگان
Ben Hmida Ramzi, Thibaud Sebastien, Richard Fabrice, Hapsari Gemala, Malécot Pierrick,