کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5135899 1493443 2017 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Multi-template imprinted polymers for simultaneous selective solid-phase extraction of six phenolic compounds in water samples followed by determination using capillary electrophoresis
موضوعات مرتبط
مهندسی و علوم پایه شیمی شیمی آنالیزی یا شیمی تجزیه
پیش نمایش صفحه اول مقاله
Multi-template imprinted polymers for simultaneous selective solid-phase extraction of six phenolic compounds in water samples followed by determination using capillary electrophoresis
چکیده انگلیسی


- Multi-template MIPs (mt-MIPs) were prepared with six phenolic compounds as template.
- mt-MIPs by precipitation polymerization had high adsorption capacity.
- mt-MIP based SPE simultaneously selectively extracted six phenolic compounds.
- The MISPE-CE proved simple, fast, eco-friendly, selective, sensitive and practical.
- High throughput MIPs platform can be constructed for analysis of multiple targets.

Novel multi-template molecularly imprinted polymers (mt-MIPs) with six phenolic compounds as the template, namely phenol, 4-chlorophenol (4-CP), 2,4,6-trichlorophenol (2,4,6-TCP), 2,4-dichlorophenol (2,4-DCP), 2-chlorophenol (2-CP) and 2,6-dichlorophenol (2,6-DCP), were prepared by precipitation polymerization and used as the adsorbents of solid-phase extraction (SPE), and coupled with capillary electrophoresis (CE) for the simultaneous selective extraction, separation and determination of trace phenolic compounds in water samples. The resultant mt-MIPs exhibited uniform spherical morphology, large specific surface area and high thermal stability, and offered high selectivity towards the six template phenolic compounds. Various parameters affecting the molecularly imprinted SPE (MISPE) efficiency were investigated in detail, and excellent CE separation was realized within 7 min. Good linearity was obtained in the range of 1-200 μg L−1 for phenol and 4-CP, and 1-300 μg L−1 for 2,4,6-TCP, 2,4-DCP, 2-CP and 2,6-DCP. High sensitivity was attained with low limits of detection and quantification ranging from 0.17 to 0.31 μg L−1 and 0.57 to 1.03 μg L−1, respectively. Satisfactory recoveries for spiked reservoir water, river water, tannery wastewater and tap water samples were achieved in the range of 82.13-105.63% with relative standard deviations within 1.68-6.96%. The developed MISPE-CE method proved practically feasible for simultaneous selective extraction/enrichment, separation and sensitive determination of multiple targets in complicated aqueous matrices.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Chromatography A - Volume 1483, 3 February 2017, Pages 30-39
نویسندگان
, , , , , , ,