Effect of temperature on residual stress and mechanical properties of Ti films prepared by both ion implantation and ion beam assisted deposition

Ti films with a thickness of 1.6 μm (group A) and 4.6 μm (group B) were prepared on surface of silicon crystal by metal vapor vacuum arc (MEVVA) ion implantation combined with ion beam assisted deposition (IBAD). Different anneal temperatures ranging from 100 to 500 °C were used to investigate effect of temperature on residual stress and mechanical properties of the Ti films. X-ray diffraction (XRD) was used to measure residual stress of the Ti films. The morphology, depth profile, roughness, nanohardness, and modulus of the Ti films were measured by scanning electron microscopy (SEM), scanning Auger nanoprobe (SAN), atomic force microscopy (AFM), and nanoindentation, respectively. The experimental results suggest that residual stress was sensitive to film thickness and anneal temperature. The critical temperatures of the sample groups A and B that residual stress changed from compressive to tensile were 404 and 428 °C, respectively. The mean surface roughness and grain size of the annealed Ti films increased with increasing anneal temperature. The values of nanohardness and modulus of the Ti films reached their maximum values near the surface, then, reached corresponding values with increasing depth of the indentation. The mechanism of stress relaxation of the Ti films is discussed in terms of re-crystallization and difference of coefficient of thermal expansion between Ti film and Si substrate.