A DRAM compatible Cu contact using self-aligned Ta-silicide and Ta-barrier

As an alternative to W contacts currently used in MOSFETs for DRAM, Cu contacts using self-aligned Ta-silicide and Ta-based barrier were studied experimentally. The silicidation of PVD Ta layers was studied first on 300 mm blanket Si wafers. The developed method was applied to patterned wafers in the contacts, that land on poly gate and active areas of NMOS, with a sequence including the PVD of Ta, a silicidation annealing, a Ta-based Cu diffusion barrier and a Cu seed for plating the Cu plug. X-ray diffraction (XRD), X-ray reflection (XRR) and sheet resistance tests of the blanket wafers show that a Ta layer of about 10 nm reacts with Si substrate and forms TaSi2 at 650 °C in a reducing ambient. Cross-sectional SEM observation reveals that the selected processing flow fills the 90 nm contacts. Top-view SEM observation on the samples after 420 °C sintering demonstrates that the Cu diffusion barrier is effective. Ion-Ioff curves of the devices show a performance for NMOS comparable to the reference samples which use Ni(Pt)Si and the same barrier and Cu contacts, indicating that the stack of the barrier/TaSi2/p-type Si has a contact resistance comparable to the barrier/Ni(Pt)Si/p-type Si.