کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5441626 | 1398268 | 2017 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Sn/Al2O3/C/CNT composite prepared by wet milling as anode material for lithium-ion cells
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Sn/Al2O3/C/CNT (SAC/CNT) composite was synthesized by a simple wet milling route. The physico-chemical, structural and morphological properties of the material were studied. The electrochemical performance of the composite as an anode material in Li-ion cells was evaluated by Cyclic Voltammetry (CV), charge-discharge cycling and electrochemical impedance measurements. The SAC/CNT material delivered an initial specific capacity of 835 mAh gâ1 with the coulombic efficiency of â¼77% along with good charge-discharge cycle performance retaining â¼88% of the initial capacity after 35 cycles. A comparison of the results with those for Sn/C (SC) and Sn/Al2O3/C (SAC) showed that the SAC/CNT composite exhibited better overall performance compared to the other two materials. The enhanced performance of SAC/CNT is attributed to the combined effect of the buffer action provided by Al2O3 accommodating volume changes of the electrode during cycling and the reduced charge transfer resistance of the electrode resulting from the inclusion of conductive CNTs.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Science: Advanced Materials and Devices - Volume 2, Issue 2, June 2017, Pages 210-214
Journal: Journal of Science: Advanced Materials and Devices - Volume 2, Issue 2, June 2017, Pages 210-214
نویسندگان
C.P. Sandhya, Bibin John, C. Gouri,