Screening current induced magnetic field in REBCO superconducting coil wound by using split wire having intermittent inner split

REBCO-coated conductor having a high critical current is promising for applications in next generation apparatuses such as ultra-high field NMR, high-resolution MRI, and high-precision accelerator. However, it has an important challenge for application in NMR and MRI, due to the single core in REBCO superconducting layer. The single core induces a large screening current-induced magnetic field (screening current field), and it influences the controlling of center field in NMR/MRI magnet. To reduce the screening current field, we have recently developed a split wire having multi-core structure by inner split method (electrical separation by bending stress, ESBS). In experiment, short samples with linear inner split by a large bending stress of 80 N were prepared and tested. However, to fabricate a long length wire with good quality, it is better to use a smaller bending stress. In this study, a low-bending-stress inner split method is used to fabricate superconducting tapes with longitudinal split in their superconducting layer. The fabrication and experimental assessments for the wire and coil are carried out.