کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5484956 1522997 2017 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A new constitutive model for calculating the loading-path dependent proppant deformation and damage analysis of fracture conductivity
ترجمه فارسی عنوان
یک مدل سازنده جدید برای محاسبه تغییر شکل پروپاننت وابسته به بارگذاری و تجزیه و تحلیل آسیب هدایت شکستگی
کلمات کلیدی
رفتار هیدروکربن پروپاننت، مدل سازمانی، آسیب هدایت مدل سازی عددی،
ترجمه چکیده
مدل های مکانیکی و نفوذپذیری معمول برای بسته بندی پروپان پروپاننت به عنوان یک ماده الاستیک شناخته می شود، اما تنش های بارگیری باعث بازسازی و تخریب پروپاننت می شود، منجر به سخت شدن مواد غیرقابل برگشت، آسیب ساختاری بسته بندی پروپپلانت، کاهش شدید فضای حفره و آسیب هدایت شکستگی می شود. در این کار، آزمایش فشاری و هدایت پذیری محدود شده بر روی پروپانتن بسته انجام شد. بر اساس نتایج تجربی، یک مدل سازنده جدید برای محاسبه تغییر شکل و نفوذپذیری پروپاننت وابسته به بارگیری ایجاد شده است. در مدل پیشنهادی، معادله عملکرد ساده و معادله پتانسیل غیر وابسته به منظور ایجاد تغییر شکل پلاستیکی غیرقابل برگشت که برای محاسبه پارامتر سخت شدن مواد و آسیب نفوذپذیری استفاده می شود، مورد استفاده قرار گرفت. مدل با داده های آزمایشی مورد تایید قرار گرفت و با استفاده از یک شبیه ساز مخزن به منظور بررسی تأثیر اثرات سایه استرس ناشی از شکست شتاب تحریک شده در حال حاضر بر تغییر شکل و نفوذپذیری پروپانتا قرار داده شده در شکست قبلی تولید شده، تایید شد. نتایج مدل شده نشان داد که عملیات شکستن فعلی باعث تخریب ریزش شکست قبلی شده است که باید برای پیش بینی تولید مورد توجه قرار گیرد.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات علوم زمین و سیاره ای (عمومی)
چکیده انگلیسی
The conventional mechanical and permeability models for proppant pack consider proppant as an elastic material, however, loading stresses cause proppant rearrangement and crush, leading irreversible material hardening, structure damage of proppant pack, strong reduction of pore space and damage of fracture conductivity. In this work, a confined compression and conductivity test on proppant pack was conducted. According to the experimental results, a new constitutive model for calculating the loading-path dependent proppant deformation and permeability was developed. In the proposed model, a simple yield equation and a non-associated potential equation were applied to derive the irreversible plastic deformation which is further used to calculate the material hardening parameter and the permeability damage. The model was validated by the experimental data and coupled into a reservoir simulator to investigate the impact of the stress shadow effects caused by the current stimulated fracture on the deformation and permeability of the placed proppant in the previous generated fracture. The modeled results revealed that the current fracturing operation damages the conductivity of the previous generated fracture, which must be taken into account for production prediction.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Natural Gas Science and Engineering - Volume 46, October 2017, Pages 365-374
نویسندگان
, , , , ,