Seasonal variations in the NO2 artifact from chemiluminescence measurements with a molybdenum converter at a suburban site in Korea (downwind of the Asian continental outflow) during 2015-2016

- The conversion efficiency of the BLC2 photolytic converter reached ∼95% at ambient NO2 levels (<100 ppbv).
- Molybdenum converter overestimated NO2 levels by 20.4 ± 14.7% compared to the actual NO2 level.
- NO2 artifact correlated well with the PM2.5 mass concentration during the fall and winter seasons.

This paper investigates the NO2 artifact associated with the chemiluminescence measurement technique that uses a molybdenum converter by applying the same technique but with a photolytic converter at a site downwind of the Asian continental outflow (Daejeon, Korea). The NO2 to NO conversion efficiencies of the molybdenum and photolytic converters were found to be 100% and 95%, respectively, at an ambient level of NO2 (<100 ppbv). Two NO2 monitors equipped with molybdenum and photolytic converters were deployed for ambient NO2 measurements in Daejeon, Korea between the fall of 2015 and the summer of 2016. It was found that the monitor equipped with the molybdenum converter overestimated NO2 levels by 20.4 ± 14.7% when compared with the actual NO2 level in the Daejeon atmosphere over the entire measurement period. This NO2 artifact (ΔNO2), defined as the difference between molybdenum NO2 and photolytic NO2 values, correlated well with the PM2.5 mass concentration during the fall and winter seasons. Based on these findings, this study develops a simple correction model for ΔNO2 using the PM2.5 mass concentration during the fall and winter seasons. The model-corrected NO2 concentration correlated well with the actual NO2 values with a slope of approximately 1.0 and R2 value of 0.98 during the fall and winter seasons.