Mesenchymal stem cell proliferation and differentiation on an injectable calcium phosphate – Chitosan composite scaffold

Calcium phosphate cement (CPC) can be molded or injected to form a scaffold in situ, has excellent osteoconductivity, and can be resorbed and replaced by new bone. However, its low strength limits CPC to non-stress-bearing repairs. Chitosan could be used to reinforce CPC, but mesenchymal stem cell (MSC) interactions with CPC-chitosan scaffold have not been examined. The objective of this study was to investigate MSC proliferation and osteogenic differentiation on high-strength CPC-chitosan scaffold. MSCs were harvested from rat bone marrow. At CPC powder/liquid (P/L) mass ratio of 2, flexural strength (mean ± sd; n = 5) was (10.0 ± 1.1) MPa for CPC-chitosan, higher than (3.7 ± 0.6) MPa for CPC (p < 0.05). At P/L of 3, strength was (15.7 ± 1.7) MPa for CPC-chitosan, higher than (10.2 ± 1.8) MPa for CPC (p < 0.05). Percentage of live MSCs attaching to scaffolds increased from 85% at 1 day to 99% at 14 days. There were (180 ± 37) cells/mm2 on scaffold at 1 day; cells proliferated to (1808 ± 317) cells/mm2 at 14 days. SEM showed MSCs with healthy spreading and anchored on nano-apatite crystals via cytoplasmic processes. Alkaline phosphatase activity (ALP) was (557 ± 171) (pNPP mM/min)/(μg DNA) for MSCs on CPC-chitosan, higher than (159 ± 47) on CPC (p < 0.05). Both were higher than (35 ± 32) of baseline ALP for undifferentiated MSCs on tissue-culture plastic (p < 0.05). In summary, CPC-chitosan scaffold had higher strength than CPC. MSC proliferation on CPC-chitosan matched that of the FDA-approved CPC control. MSCs on the scaffolds differentiated down the osteogenic lineage and expressed high levels of bone marker ALP. Hence, the stronger CPC-chitosan scaffold may be useful for stem cell-based bone regeneration in moderate load-bearing maxillofacial and orthopedic applications.