کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
11024201 1701175 2018 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
xperimental and numerical investigation on cold-formed steel semi-oval hollow section compression members
ترجمه فارسی عنوان
تحقیقات آزمایشگاهی و عددی بر روی بخش های فشرده سازی توخالی بخش نیمه ابری شکل فولاد شکل گرفته است
کلمات کلیدی
سرد شدن روش مستقیم، المان محدود، ستونهای تکمیل شده بخش های توخالی نیمه اویل، طراحی سازه،
ترجمه چکیده
یک بررسی جامع و عددی بر روی ستون های پانل حاوی نیمه بلوط توخالی شکل فولاد شکل گرفته و در اینجا ارائه شده است. بخش های توخالی نیمه بیضی که در این تحقیق مورد بررسی قرار می گیرند شامل یک فلنج نیمه دایره ای، یک فلنج تخت و دو صفحه ی تخت است. چهار مقطع عرضی شامل شد و در مجموع 19 آزمایش در قالب بارگیری غلیظ با طول نمونه های مختلف در برنامه آزمون انجام شد. یک مدل عنصر محدودی توسعه داده شد و بر اساس نتایج آزمون تایید شد. مدل عددی قادر به تکرار نتایج آزمون است. پس از اعتبارسنجی مدل عنصر محدود، یک مطالعه ی گسترده ی پارامتری انجام شد که متشکل از 200 داده ی عددی است که طیف وسیعی از هندسه های مقطعی و لایه ی ستون را پوشش می دهد. نتایج حاصل از برنامه آزمایشی و مطالعه عددی با قدرت پیش بینی شده توسط روش قدرت مستقیم و ثابت اصلاح شده مقایسه شد. تجزیه و تحلیل قابلیت اطمینان به منظور ارزیابی قابلیت اطمینان روش های طراحی انجام شده است. نتایج مقایسه نشان می دهد که روش قدرت مستقیم موجود عموما پیش بینی های محافظه کارانه ارائه می دهد، اما پیش بینی ها برای بخش های باریک پراکنده می شوند. اصلاح برای این مسئله پیشنهاد شد. روش اصلاح مستقیم قدرت دقیق و پیش بینی های پراکنده را با روش قابل اعتماد فراهم می کند. روش اصلاح شده مستقیم قدرت مناسب برای ستون های توخالی نیمهوار شکل فولادی سرد به خصوص برای ستون های ستون فقرات و ستون ها با بخش های باریک است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
A comprehensive experimental and numerical investigation on cold-formed steel semi-oval hollow section pin-ended columns was performed and is presented herein. The semi-oval hollow sections investigated in this study are composed of one semi-circular flange, one flat flange and two flat web plates. Four cross-section sizes were included and a total of 19 tests was conducted under concentric loading with different specimen lengths in the test program. A finite element model was developed and validated against the test results. The numerical model is capable to replicate the test results. Upon the validation of finite element model, an extensive parametric study was performed consisting of 200 numerical data cases, which cover a wide range of cross-section geometries and column slenderness. The results obtained from experimental program and numerical study were compared with the predicted strengths by the existing and modified Direct Strength Method. Reliability analysis was conducted to assess the reliability of the design methods. The comparison results show that the existing Direct Strength Method generally provides conservative predictions, but the predictions are scattered for slender sections. Modification was proposed to address this issue. The modified Direct Strength Method provides accurate and less scattered predictions in a reliable manner. The modified Direct Strength Method is suitable for cold-formed steel semi-oval hollow section columns, especially for short column members and columns with slender sections.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Constructional Steel Research - Volume 151, December 2018, Pages 174-184
نویسندگان
, ,