HRTEM studies of aging precipitate phases in the Mg-10Gd-3Y-0.4Zr alloy

Rare-earth (RE) element addition can remarkably improve the mechanical properties of magnesium alloys through precipitation hardening. The morphology, distribution and crystal structure of precipitates are regarded as major strengthening mechanisms in the Mg-RE alloys. In order to understand the formation of precipitates during aging at 225 °C in a Mg-10Gd-3Y-0.4Zr alloy (GW103K) with high strength and heat resistance, a high-resolution transmission electron microscopy (HRTEM) was employed to characterize the microstructural evolution. It was found that three types of precipitates were observed in the alloy at the early stage, named as: single layer D019 structure, one single layer D019 structure and one layer of Mg, two parallel single layers (containing RE) and Mg layer in between, which was regarded as ordered segregation of RE, precursors to form β″ and β′ phase, respectively. Both of β″ and β′ phase were transformed from the precursors. It was also found that large size of β′ phase and the small size of β″ phase were constantly existent in the whole aging process. β′ phase played a major role in the strengthening of the GW103K alloys and the decrease of the hardness was caused by the coarsening of β′ phase.

Graphical AbstractHRTEM images taken along <0001> zone axis and corresponding Fourier transform (FT) patterns showing three types of precipitates in the GW103K alloy aged at 225 °C for 0.5 h (a) Single layer D019 structure; (c) One single layer D019 structure and one layer of Mg; (e) Two parallel single layers (containing RE) and Mg layer in between; (b), (d), (f) Corresponding Fourier transform (FT) patterns for (a), (c), (e)Figure optionsDownload as PowerPoint slide