Dynamics analysis of cavitation disintegration of microparticles during nanopowder preparation in a new Water Jet Mill (WJM) device

A physical analysis of cavitation-based implosive breakage of solid particles focusing on practical application during fine particle disintegration in a liquid suspension is submitted in the present paper. The physical source of the cavitation dynamics phenomena involved is an extreme velocity gradient induced by an ultrahigh-energy liquid jet mixing together with a slow liquid suspension of milled particles. Extreme tensile stresses occurring at velocity gradients over 1000 ms−1mm−1 at the operating temperature of 65 °C generates high-intensity pure vapor cavitation in the degassed water dispersion with extreme values of impact pressure in the final of bubble implosions on particle surfaces.Preparation of silicon nanoparticles with median diameter approximately 148 nm using a newly developed “Water Jet Mill” (WJM) device is demonstrated in the present article as an example of application of the aforementioned disintegration method as well as of theoretical analysis of this method. The disintegration method is characterized by a high potential for milling of submicron particles with high efficiency.