Synthesis and electrical characteristics of (1 − x)BaTiO3–xK0.5Bi0.5TiO3 PTCR ceramics

Solid solutions of (1 − x)BaTiO3–xK0.5Bi0.5TiO3 were prepared by the solid state reaction technique. Samples were sintered in reducing atmosphere of N2/H2 in the temperature range 1100–1240 °C with subsequent oxidation at 700 °C. Phase composition and crystal structure were investigated by X-ray powder diffractometry (XRPD). It was shown that all samples of (1 − x)BaTiO3–xK0.5Bi0.5TiO3 (0 ≤ x < 0.4) exhibit a tetragonal structure at room temperature, the parameters a and c decrease with increasing x. With increasing x the Curie temperature of solid solutions (1 − x)BaTiO3–xK0.5Bi0.5TiO3 (0.1 ≤ x < 0.4) increases from 150 to 220 °C. The values of potential barriers at grain boundaries were calculated on the basis of Heywang model. With increasing x, the potential barrier at grain boundaries increases. It was shown that the grain size decreases with increasing the bismuth–potassium titanate content. The complex impedance results indicate that the grain boundary and the outer layer region, located between the boundary and the core of the grain, make a contribution to the positive temperature coefficient of resistance (PTCR) effect in (1 − x)BaTiO3–xK0.5Bi0.5TiO3 solid solutions. With increasing x ρmax increases due to an increase in potential barrier at grain boundaries.

► BaTiO3–K0.5Bi0.5TiO3 samples were synthesized by solid state reactions technique.
► Resistance of ceramic increases with x due to a decrease in ceramic's grain size.
► With increasing x, the potential barrier at grain boundaries increases.
► Specimens of BaTiO3–K0.5Bi0.5TiO3 with Curie temperature up to 220 °C were obtained.
► The outer layer and the grain boundary make a contribution to the PTCR effect.