Surface modification of polyester to produce a bacterial cellulose-based vascular prosthetic device

The surface of medical grade polyesters was modified to impart hydrophilic character for attachment to bacterial synthesized cellulose to produce a vascular prosthetic device. The polyesters were treated with UV/ozone, air plasma, and nitrogen plasma for various lengths of time. The unmodified and modified surfaces were analyzed by X-ray photoelectron spectroscopy (XPS) and advancing contact angle measurements. The surfaces were then coated with bacterial produced cellulose to study adhesion properties through tensile testing (peel testing). UV/ozone and plasma treatment XPS results indicated an increase in the oxygen concentration in the form of CO(H) on the treated polyester surfaces. The treatment time to reach steady state in the case of air and nitrogen plasmas took the order of seconds, while 7 min and longer were required for UV/ozone treatment. Peel strength tests to measure adhesion of modified polyester to cellulose reached their maximum values when the CO(H) concentrations were at the highest level. It was also at this level that the contact angle measurements showed no further decrease.