کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7212021 | 1469340 | 2018 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Improving flexural strength and toughness of geopolymer mortars through additively manufactured metallic rebars
ترجمه فارسی عنوان
بهبود مقاومت خمشی و سختی خمپاره های ژئوپلیمر از طریق میله های افزایشی فلزات
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ژئوپلیمرها، ملات، سختی، خاکستر پرواز زبری سطح، بکش بیرون، تولید افزودنی،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
This paper presents the results of an experimental study on the flexural reinforcement of a geopolymer mortar through additively manufactured metallic rebars. A mortar employing a geopolymer binder with low calcium content fly ash is reinforced with Ti6Al4V rebars additively manufactured though electron beam melting. The effectiveness of reinforcements realized with rebars featuring either smooth or rough surface profiles is studied through three-point bending tests and post-test microscopy analysis. The given experimental results highlight micro and macroscale pullout failure mechanisms in specimens reinforced with rebars showing cylindrical embossments on the lateral surface, which remarkably improve the flexural strength and the interfacial bond strength of the analyzed mortar. The role played by the surface roughness of the reinforced elements on the bond-slip response of the matrix-rebar interface is highlighted, while drawing comparisons with available literature results on cement mortars.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 145, 15 July 2018, Pages 155-161
Journal: Composites Part B: Engineering - Volume 145, 15 July 2018, Pages 155-161
نویسندگان
Ilenia Farina, Mariano Modano, Giulio Zuccaro, Russell Goodall, Francesco Colangelo,