کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7212446 | 1469386 | 2016 | 27 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A new approach to fabricate poly(vinylidene fluoride-trifluoroethylene) fibers using a torsion-stretching method and characterization of their piezoelectric properties
ترجمه فارسی عنوان
یک رویکرد جدید برای ساخت فیبرهای پلی (وینیلیدین فلوراید - تری فلوئورو اتیلن) با استفاده از روش کشش کششی و خصوصی سازی خواص پیزوالکتریک
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
مواد هوشمند، فیبر پلیمری (نساجی)، رفتار ضربه، تست مکانیکی،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
A new, simple, and economical approach to fabricate P(VDF-TrFE) fibers using a torsion-stretching method is introduced. The average Young's modulus, strength, and nominal strain of the fibers were 902 MPa, 258.56 MPa, and 35.23%, respectively. Three conventional treatments (mechanical stretching, electrical poling, and annealing-cooling) were conducted to enhance the β-phase of the P(VDF-TrFE) fibers. All these treatments were effective in enhancing the crystallinity of the β-phase of the fibers. The maximum β-phase fraction (60.78%) was obtained from annealing-cooling, while the control group exhibited a β-phase fraction of only 48.29%. Furthermore, using a carbon-epoxy composite laminate an electro-mechanical test was conducted to estimate the piezoelectric performance of the P(VDF-TrFE) fibers for assessing the relationship between the generated voltage and the compressive force. The maximum generated voltage from the fiber-type sensors treated by annealing-cooling was 0.14 V, which had the highest relative β fraction among the three treatments.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 99, 15 August 2016, Pages 112-120
Journal: Composites Part B: Engineering - Volume 99, 15 August 2016, Pages 112-120
نویسندگان
Ji-Hun Bae, Seung-Hwan Chang,