کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9795651 | 1514932 | 2005 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The influence of boundary structure on the mechanical properties of ultrafine grained AA1050
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Commercial purity aluminum AA1050 was subjected to one of two equal channel angular extrusion (ECAE) routes. Route “A” is defined as no rotation between passes and route “C” is rotated 180° between extrusion passes. The resulting microstructures have similar grain sizes but relatively different grain boundary structures. The microstructure processed by route “A” has approximately 70% high angle boundaries (HABs), while the route “C” has approximately 40% HABs. The boundary structure plays an important role in the mechanical properties of the material because these boundaries act as a source and sink of dislocations. Mechanical tests conducted on these two microstructures at intermediate and dynamic strain rates at both 77 and 298 K are compared with the results of material tested at quasi-static strain rate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volumes 410â411, 25 November 2005, Pages 265-268
Journal: Materials Science and Engineering: A - Volumes 410â411, 25 November 2005, Pages 265-268
نویسندگان
P.L. Sun, E.K. Cerreta, G.T. III, P. Rae,