On the sharp bend of the S–N curve and the crack propagation behavior of extruded magnesium alloy Fulltext Access 4 Pages 2007
Interaction of cracks with precipitates and grain boundaries: Understanding crack growth mechanisms through focused ion beam tomography Fulltext Access 4 Pages 2007
Mechanical enhancement of carbon fiber/epoxy composites by graphite nanoplatelet reinforcement Fulltext Access 4 Pages 2007
A methodology for predicting fatigue crack propagation rates in titanium based on damage accumulation Fulltext Access 4 Pages 2007
Silica shell cemented anisotropic architecture of Fe3O4 beads via magnetic-field-induced self-assembly Fulltext Access 4 Pages 2007
Sympathetic nucleation of austenite in a Fe–22Cr–5Ni duplex stainless steel Fulltext Access 4 Pages 2007
One-step synthesis and densification of nanostructured TiSi2–SiC composite from mechanically activated (TiC + 3Si) powders by high-frequency-induced heated combustion Fulltext Access 4 Pages 2007
Microstructural evolution of Sn-rich Au–Sn/Ni flip-chip solder joints under high temperature storage testing conditions Fulltext Access 4 Pages 2007
Comparative study of precipitation behavior and texture formation in cold rolled-batch annealed and cold rolled-continuous annealed interstitial free high strength steels Fulltext Access 4 Pages 2007
Effect of substrate texture on the formation of ζ phase in the overlying galvannealed coatings in industrially produced interstitial free steels Fulltext Access 4 Pages 2007
The strengthening effect of icosahedral phase on as-extruded Mg–Li alloys Fulltext Access 4 Pages 2007
Facile fabrication and structural studies of filtered Ge nanowires from aged Al–Ge alloy Fulltext Access 4 Pages 2007
Dye-sensitized solar cell architecture based on indium–tin oxide nanowires coated with titanium dioxide Fulltext Access 4 Pages 2007
Nature of growth of dual titanium boride layers with nanostructured titanium boride whiskers on the surface of titanium Fulltext Access 4 Pages 2007
The mechanical and thick section bending behavior of friction stir processed aluminum plate Fulltext Access 4 Pages 2007
Creep behavior and tensile properties of Mo- and Fe-added orthorhombic Ti–22Al–11Nb–2Mo–1Fe alloy Fulltext Access 4 Pages 2007
Attaining deep drawability and non-earing properties in Ti + Nb interstitial-free steels through double cold rolling and annealing Fulltext Access 4 Pages 2007
Contribution of triple junctions to the diffusion anomaly in nanocrystalline materials Fulltext Access 4 Pages 2007
Electron microscopy study of nanocrystalline copper deformed by a microhardness indenter Fulltext Access 4 Pages 2007
First-principles study of the effect of hydrogen on the Ti self-diffusion characteristics in the alpha Ti–H system Fulltext Access 4 Pages 2007
Processing of copper fiber-reinforced Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 bulk metallic glass composites Fulltext Access 4 Pages 2007
Effect of welding parameters on tensile properties and fracture behavior of friction stir welded Al–Mg–Si alloy Fulltext Access 4 Pages 2007
Effect of ZrF4 on hot-pressed hydroxyapatite/monoclinic zirconia composites Fulltext Access 4 Pages 2007
Solidification path in third-generation Ni-based superalloys, with an emphasis on last stage solidification Fulltext Access 4 Pages 2007
The recovery of structural relaxation-induced viscoelastic creep strain in bulk and ribbon Pd40Cu30Ni10P20 glass Fulltext Access 4 Pages 2007
Cu nanowhiskers embedded in Nb nanotubes inside a multiscale Cu matrix: The way to reach extreme mechanical properties in high strength conductors Fulltext Access 4 Pages 2007
A new algorithm to treat ternary diffusion couples with α/α + β boundaries Fulltext Access 4 Pages 2007
Effect of film thickness and annealing temperature on hillock distributions in pure Al films Fulltext Access 4 Pages 2007
Effect of sintering temperature on grain boundary character distribution in pure nickel Fulltext Access 4 Pages 2007
Preparation of homogeneous Pb(ZrxTi1−x)O3 by a rapid-quenching technique and its compositional fluctuation Fulltext Access 4 Pages 2007
The crack initiation mechanism of the forged Mg–Zn–Y–Zr alloy in the super-long fatigue life regime Fulltext Access 4 Pages 2007
Time-resolved deformation measurements of the Portevin–Le Chatelier bands Fulltext Access 4 Pages 2007
Inverse effect of strain rate on mechanical behavior and phase transformation of superaustenitic stainless steel Fulltext Access 4 Pages 2007
Strengthening mechanisms in electrodeposited Ni–P alloys with nanocrystalline grains Fulltext Access 4 Pages 2007
Electron beam welding of the dissimilar Zr-based bulk metallic glass and Ti metal Fulltext Access 4 Pages 2007
Use of powder metallurgy (PM) compacted electrodes for electrical discharge surface alloying/modification of Ti–6Al–4V alloy Fulltext Access 4 Pages 2007
Facile synthesis of monodisperse palladium nanocubes and the characteristics of self-assembly Fulltext Access 4 Pages 2007
The effect of strain rate sensitivity evolution on deformation stability during superplastic forming Fulltext Access 4 Pages 2007
High cycle fatigue life prediction of cold forging tools based on workpiece material property Fulltext Access 4 Pages 2007
Springback determination of sheet metals in an air bending process based on an experimental work Fulltext Access 4 Pages 2007
Effects of tooling temperatures on formability of titanium TWBs at elevated temperatures Fulltext Access 4 Pages 2007
Microstructural analysis of AISI 304 bars welded with high speed pulsed discharges Fulltext Access 4 Pages 2007
Development of a ball groove measuring system for forged outer race constant velocity (CV) joints Fulltext Access 4 Pages 2007
Examination of machining parameters on surface roughness in EDM of tool steel Fulltext Access 4 Pages 2007
The improved power-law, stress-dependent, energy-barrier model of 9Cr–1Mo–0.2V steel using short-term creep data Fulltext Access 4 Pages 2007
Development of a test method for the rheological characterization of polymers under the injection molding process conditions Fulltext Access 4 Pages 2007
An analytical model for improving precision in single point incremental forming Fulltext Access 4 Pages 2007
Behavior pattern and parametric characterization for low density crushable foams Fulltext Access 4 Pages 2007
The evaluation of residual stress on the drawn wire using nano-indentation test Fulltext Access 4 Pages 2007
Determination of optimum process parameters for wrinkle free products in deep drawing process Fulltext Access 4 Pages 2007
Experimental investigations of the roll load and roll torque when high strength steel is roll formed Fulltext Access 4 Pages 2007
Processing effects in aluminum micro-channel tube for brazed R744 heat exchangers Fulltext Access 4 Pages 2007
Evaluation of surface quality and adhesion strength of treated solid wood Fulltext Access 4 Pages 2007
A high-strength bulk nanocrystalline Al–Fe alloy processed by mechanical alloying and spark plasma sintering Fulltext Access 4 Pages 2007
Determination of the crystal structure of FeTiP-type precipitates in a few interstitial-free high-strength steels Fulltext Access 4 Pages 2007
Layered nanostructured Ni with modulated hardness fabricated by surfactant-assistant electrodeposition Fulltext Access 4 Pages 2007
Two-step-like anomalous glass transition behavior in Ni–Zr–Nb–Al–Ta metallic glass alloys Fulltext Access 4 Pages 2007
Tensile properties of stainless steel sandwich sheets with fibrous cores Fulltext Access 4 Pages 2007
Fracture of Ni with grain-size from nanocrystalline to ultrafine scale under cyclic loading Fulltext Access 4 Pages 2007
A thermodynamic approach to energy storage on mechanical alloying of the Cu–Cr system Fulltext Access 4 Pages 2007
Achieving ultrafine grain size in Mg–Al–Zn alloy by friction stir processing Fulltext Access 4 Pages 2007
Determination of three-dimensional grain boundary connectivity from two-dimensional microstructures Fulltext Access 4 Pages 2007
Phase stability of hafnium oxide and zirconium oxide on silicon substrate Fulltext Access 4 Pages 2007
Superplastic behavior of Ti–43Al–7(Nb,Mo)–0.2B alloy in the cast + heat-treated condition Fulltext Access 4 Pages 2007
The effect of the welding temperature on the weldability in diffusion welding of martensitic (AISI 420) stainless steel with ductile (spheroidal graphite-nodular) cast iron Fulltext Access 4 Pages 2007
The importance of grain size relative to grain boundary character on the sensitization of metastable austenitic stainless steel Fulltext Access 4 Pages 2007
Anomalous internal friction associated with the thermoelastic martensitic transformation in a Cu-Al-Ni-Mn-Ti alloy Fulltext Access 4 Pages 2007
Microwave-assisted combustion synthesis of CoFe2O4 with urea, and its magnetic characterization Fulltext Access 4 Pages 2007
Synthesis and photocatalytic activity of hydrated layered perovskite K2−xLa2Ti3−xNbxO10 (0 ⩽ x ⩽ 1) and protonated derivatives Fulltext Access 4 Pages 2007
Structural and luminescence properties of pulsed laser deposited green-emitting Zn2SiO4:Mn phosphor thin films Fulltext Access 4 Pages 2007
Transmission electron microscopy studies on the effect of strain on Al and Al–1% Sc alloy Fulltext Access 4 Pages 2007
Effect of reaction heat on reactive joining of TiAl intermetallics using Ti–Al–C interlayers Fulltext Access 4 Pages 2007
Atomic image of indentation crack tip during stress corrosion cracking of mica in moist air Fulltext Access 4 Pages 2007
Effect of non-linear liquidus and solidus in undercooled dendrite growth: A comparative study in Ni–0.7 at.% B and Ni–1 at.% Zr systems Fulltext Access 4 Pages 2007