کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10343911 | 697297 | 2013 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Design of large-mode-area single-mode optical fiber with lowing bending loss for Raman distributed temperature sensor
ترجمه فارسی عنوان
طراحی فیبر نوری تک حالت بزرگ با کم شدن خمش برای سنسور دمای توزیع رامان
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
الیاف کریستال فوتونی، حالت تک، منطقه وسیع حالت، کاهش خم شدن، رامان توزیع کننده دما،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی کامپیوتر
شبکه های کامپیوتری و ارتباطات
چکیده انگلیسی
Numerical investigation on the design of a large-mode-area (LMA) single-mode photonic crystal fiber (PCF) as the sensing fiber for Raman distributed temperature sensor (DTS) is presented. The PCF can enable single-mode operation and have an extremely LMA exceeding 288 μm2 when kept straight and over 284 μm2 with a lower bending loss of 0.25 dB/m when bent over a 5 cm radius at a wavelength of 1550 nm. We outline the principles of our fiber design and explore the unique properties of the fiber for Raman DTS. Calculation results show that the Raman DTS system, which used the proposed PCF as the sensing fiber, can improve SNR about 3.4 times by increasing the input power compared with the Raman DTS system with a conventional single-mode fiber, because of the improved LMA, single-mode operation and good bending characteristics of the PCF.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optical Fiber Technology - Volume 19, Issue 6, Part A, December 2013, Pages 671-676
Journal: Optical Fiber Technology - Volume 19, Issue 6, Part A, December 2013, Pages 671-676
نویسندگان
Zhiqiang Wang, Jiajia Ye, Chun-Liu Zhao, Zaixuan Zhang, Jianfeng Wang, Shuqin Zhang, Shangzhong Jin,