Processing of concretes with a high power CO2 laser

Laser material processing, being a non-contact process, minimizes many of the complexities involved in the decontamination and decommissioning of nuclear facilities. A high power laser beam incident on a concrete surface can produce spalling, glazing or vaporization, depending upon the laser power density and scan speed. This paper presents effect of various laser processing parameters on the efficiency of material removal by surface spalling and glazing. The size of laser beam at constant fluence or energy density had significantly different effect on the spalling process. In thick concrete block cutting the flow or removal of molten material limits the cutting depth. By employing repeated laser glazing followed by mechanical scrubbing process cutting of 150mm thick concrete block was carried out. Gravitation force was utilized for molten materials to flow out while drilling holes on vertical concrete walls. The dependence of the incident laser beam angle on drilling time was experimentally studied.