کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10409400 | 894011 | 2006 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Design parameter characterisation and experimental validation of hydrostatic actuation suitable for MEMS
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Hydrostatic actuation is a novel micro hydraulic actuation principle that uses temperature-induced pressure changes in a contained fluid as the driving force. The mechanism for actuation is unique in MEMS and the mechanical/structural design has not yet been fully characterised. In this paper, characterisation was carried out by assessing analytical models from earlier researchers created in an attempt to describe the mechanics of Bourdon tubes. Finite element models were produced as a more accurate means of analysis due to the inherent complexities and geometric nonlinearities of hydrostatic actuation. To validate the analytical and finite element models, macro prototypes were developed and tested as a means of comparison of the mechanics of the proposed hydrostatic actuation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 127, Issue 1, 28 February 2006, Pages 147-154
Journal: Sensors and Actuators A: Physical - Volume 127, Issue 1, 28 February 2006, Pages 147-154
نویسندگان
Simon Mutzenich, Thurai Vinay, Dinesh K. Sood, Gary Rosengarten,