کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10409703 | 894104 | 2005 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Error correction for transformed concave and convex MAGFETs with dc supply voltage
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This study presents two curve-fitting models of concave and convex magnetic field-effect transistor (MAGFETs) with a dc bias voltage supplied at the gate of the MAGFET. Experimental results indicate that the highest absolute sensitivity SA, supply-current-related sensitivity SRI and supply-voltage-related sensitivity SRV are 1.39 V/T, 2004.8 V/AT and 0.46 V/VT for the concave MAGFET, and SA = 0.77 V/T, SRI = 512.4 V/AT, and SRV = 0.29 V/VT for the convex MAGFET with a 3 V dc supply voltage. A magnetic device with geometric parameters, L/W = 40 μm/40 μm and d = 2 μm, is the best choice to optimize sensitivity, but a MAGFET with geometric parameters, L/W = 40 μm/40 μm and d = 4 μm, is another good choice because of its consistent geometric correction factor. The proposed arrayed and symmetrical designs can increase output voltages and eliminate unwanted errors. Broadening the drain gap not only improves the linearity of the output voltage, but also clearly makes the error correction factor consistent for both concave and convex MAGFETs. Minimizing the aspect ratio reduces the sensitivity of the concave MAGFET faster than that of the convex MAGFET. In general, both concave and convex MAGFETs are suited to fabricating magnetic devices with a wide drain gap.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 117, Issue 1, 3 January 2005, Pages 41-49
Journal: Sensors and Actuators A: Physical - Volume 117, Issue 1, 3 January 2005, Pages 41-49
نویسندگان
Guo-Ming Sung,