Use of conducting polypyrrole blends as gas sensors

We discuss the use of polymeric blends formed by the controlled growth of doped polypyrrole chains in the interior of films of different dielectric polymers as sensors of the presence of representative examples of volatile organic compounds. The dielectric films (of either (poly(caprolactone), poly(ethylene oxide), poly(methyl-methacrylate), poly(vinyl alcohol), or poly(vinyl-acetate)) containing an appropriate oxidizing agent were prepared atop a conducting glass substrate and the polymerization of polypyrrole was induced through the vapor phase technique, after exposure of the desired matrix to pyrrole vapor. The UV-vis-NIR spectra of the films were used to monitor the increase of their conductive character through the assessment of the intensity of the polaron band characteristic of the doped form of polypyrrole. The change of conductivity upon exposure to the volatile compounds used (methanol, ethanol, carbon tetrachloride and benzene) was adopted as a measure of the corresponding sensitiveness of the films. Differently to the previous case in which doped films of polypyrrole were examined as sensors (when a similar low level of response was found towards apolar compounds), now we have found that some of the blends (PMMA/PPY and PVA/PPY, in special) exhibit a particular sensitiveness to the polarity of the molecule of the vapor tested. We therefore suggest that the simultaneous use of such polypyrrole blends in an arrangement pattern can improve the efficiency of electronic nose devices.