کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10416313 | 898420 | 2005 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Mode-I fracture toughness testing of thick section FRP composites using the ESE(T) specimen
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Mode-I fracture toughness testing of thick section FRP composites using the ESE(T) specimen Mode-I fracture toughness testing of thick section FRP composites using the ESE(T) specimen](/preview/png/10416313.png)
چکیده انگلیسی
Experimental and numerical analyses are performed to determine the translayer mode-I fracture toughness of a thick-section fiber reinforced polymeric composite using the eccentrically loaded, single-edge-notch tension, ESE(T) specimen. Finite element analyses using the virtual crack closure technique were performed to assess the effect of material orthotropy on the mode-I stress intensity factors in the ESE(T) specimen. The stress intensity factors for the proposed ESE(T) geometry, are calculated as a function of the material orthotropic parameters. The formula is validated for a class of thick composite materials. The thick composite tested in this study is a pultruded composite material that consists of roving and continuous filament mat layers with E-glass fiber and polyester matrix materials. Data reduction from the fracture tests was performed using two methods based on existing metallic and composite ASTM [ASTM E 1922, Standard Test Method for Translaminar Fracture Toughness of Laminated Polymer Matrix Composites, Annual Book of ASTM Standards, 1997; ASTM E 399, Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, Annual Book of ASTM Standards, 1997] fracture testing standards. Criteria for assessing test validity and for determining the critical load used in calculating the fracture toughness were examined. Crack growth measurements were performed to determine the amount of stable crack growth before reaching critical load. The load versus notch mouth opening displacement, for different crack length to width ratios is affected by material orthotropy, nonlinearity, and stable crack propagation. The mode-I translayer fracture toughness and response during crack growth is reported for ESE(T) specimen with roving layers oriented both, transverse and parallel to the loading direction.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Fracture Mechanics - Volume 72, Issue 4, March 2005, Pages 631-643
Journal: Engineering Fracture Mechanics - Volume 72, Issue 4, March 2005, Pages 631-643
نویسندگان
Rani El-Hajjar, Rami Haj-Ali,