کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10417460 | 902370 | 2014 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
FE-simulation of machining processes with a new material model
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: FE-simulation of machining processes with a new material model FE-simulation of machining processes with a new material model](/preview/png/10417460.png)
چکیده انگلیسی
For the validation of the proposed material model, longitudinal turning experiments were conducted on AISI 1045 steel. Four different cutting tools and process conditions were investigated, which cover a broad range from finishing to roughing. A high speed camera was used to film the chip formation and chip flow in order to compare it to the simulation results. The three cutting forces components were also collected. Measured chip temperatures were taken from the literature. The validation showed that the implementation of the selected material model results in a close agreement between experimentally obtained and predicted chip geometries, cutting forces and chip temperatures.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 214, Issue 3, March 2014, Pages 599-611
Journal: Journal of Materials Processing Technology - Volume 214, Issue 3, March 2014, Pages 599-611
نویسندگان
S. Buchkremer, B. Wu, D. Lung, S. Münstermann, F. Klocke, W. Bleck,