کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10418075 | 902650 | 2005 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Three-dimensional finite element analysis of tube spinning
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A three-dimensional elastic-plastic finite element model for three-roller backward spinning of a cylindrical workpiece is established and a practical spinning process of Hastelloy C alloy tube is simulated with the model and ANSYS software. The features of this model are as follows: (i) contact pairs are built up not only between the workpiece and rollers but also between the workpiece and the mandrel; (ii) the fixed end of the workpiece is constrained only in one axial direction, which is consistent with the practical spinning process; (iii) the rotation of the workpiece driven by the mandrel and the passive rotations of rollers due to the friction between the rollers and the workpiece are considered; (iv) the effect of the tip radius of the rollers is considered. The phenomena during tube spinning are simulated and analyzed with this model, such as bell-mouth, build-up, bulging in front of and between rollers, diametral reduction and growth. The simulation results correspond well to experiments.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 168, Issue 1, 15 September 2005, Pages 68-74
Journal: Journal of Materials Processing Technology - Volume 168, Issue 1, 15 September 2005, Pages 68-74
نویسندگان
F.A. Hua, Y.S. Yang, Y.N. Zhang, M.H. Guo, D.Y. Guo, W.H. Tong, Z.Q. Hu,