کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10418352 | 902744 | 2013 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Numerical and experimental study of post-heat treatment gas quenching and its impact on microstructure and creep in CMSX-10 superalloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The gas quenching process at the end of solution heat treatment and its influence on microstructure and creep properties of the single crystal superalloy CMSX-10 was studied using numerical and experimental techniques. Computational fluid dynamics was used to model the turbulent flow field in the furnace during quenching. Boundary conditions were obtained by measuring the pressure drop across the chamber. The calculated flow velocities for a range of process conditions were in reasonable agreement with the ones measured using a Pitot tube; differences were mainly attributed to the unsteady nature of the turbulent flow. The resulting cooling rates in the furnace load were quantified with higher cooling rates leading to smaller γⲠprecipitates. Asymmetry of the flow field leads to variations in γⲠsize. This can be reduced by changing the way turbine blades are placed in the furnace. Creep tests demonstrated that this can have a significant effect on the creep properties of the material. At low temperatures (850 °C), specimens with larger γⲠparticles showed better creep performance, with less pronounced primary creep. At high temperatures (1100 °C) small γⲠsize showed a slight advantage.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 213, Issue 12, December 2013, Pages 2350-2360
Journal: Journal of Materials Processing Technology - Volume 213, Issue 12, December 2013, Pages 2350-2360
نویسندگان
Francesco Cosentino, Nils Warnken, Jean-Christophe Gebelin, Roger C. Reed,