کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10418853 | 903325 | 2005 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Spline finite strip analysis of forming parameters in roll forming a channel section
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Spline finite strip analysis of forming parameters in roll forming a channel section Spline finite strip analysis of forming parameters in roll forming a channel section](/preview/png/10418853.png)
چکیده انگلیسی
A B3-spline finite strip method was built. The method was employed to investigate the effects of forming parameters, such as the bend angle increment, the strip thickness, the material yield limit, the flange length, the web width, and the distance between two roll stations on the peak longitudinal edge membrane strain developed in the cold roll forming process of a channel section. The peak longitudinal edge membrane strain increases as the bend angle increment, the strip thickness, the material yield limit, the flange length, and the web width increase, but decreases as the distance between two roll stations increases. The results from the investigation are consistent with the phenomena observed in the previous roll forming practice.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 159, Issue 3, 10 February 2005, Pages 383-388
Journal: Journal of Materials Processing Technology - Volume 159, Issue 3, 10 February 2005, Pages 383-388
نویسندگان
Zhi-Wu Han, Cai Liu, Wei-Ping Lu, Lu-Quan Ren, Jin Tong,