Tracking effective measures for closed-loop recycling of automobile steel in China

• The feasibility of recycling 20 types of steel sheets is precisely examined.
• The source–sink relationship is evaluated for both quantity and quality of steel.
• At the present level of technology, down-cycling in China is unavoidable in 2050.
• Improving copper tolerance in steel production is most effective now and in 2050.

Closed-loop recycling of steel in automobiles is particularly difficult because of the low tolerance for impurities and the use of composites of various types of steel products. Technologies that reduce impurities or increase impurity tolerance must be developed and introduced to the steel recycling system at the appropriate time. This study evaluated the feasibility of closed-loop recycling in the automobile industry in China. Material pinch analysis combined with dynamic modeling of the life cycle of steel sheets used in the manufacture of automobiles was employed to estimate the amount of steel sheet scrap available for closed-loop recycling and the amount of copper contamination in the scrap. The results indicate that by 2050, more than half of the old steel sheet scrap generated annually will have to be down-cycled because of its high copper contamination. However, scenario analyses of three types of technologies for mitigating the problem of copper contamination showed the potential for increasing the amount of old scrap used in closed-loop recycling. In particular, improving copper tolerance in the steel production process could be effective both now and in 2050.