Global anthropogenic tellurium cycles for 1940–2010

• Tellurium (Te) is increasingly used in thin film solar cells (CdTe).
• There are concerns about Te availability as CdTe production increases.
• Today, about 1.1 Gg Te is present in electrical and electronic devices globally.
• From 1940 to 2010, about 8.5 Gg Te was used once and then lost to the environment.

Tellurium is increasingly used in solar photovoltaics in the form of cadmium–telluride (CdTe) thin films. There are concerns regarding whether tellurium availability could be a constraint on large-scale deployment of CdTe photovoltaics. The present work brings a new perspective to the discussion of tellurium availability by providing the first extant global tellurium cycles constructed with material flow analysis principles. The tellurium cycles, for 1940–2010, present information on the production, fabrication and manufacturing, use, and resource management stages during this period. The results of the analysis show that during 1940–2010 approximately 11 Gg of refined tellurium was produced. This represents about 4.5% of the tellurium that was extracted from the ground during copper mining. Almost 80% of the refined tellurium, 8.5 Gg, was dissipated into end-uses such as metallurgical additives to iron, steel, and nonferrous metals, and thereby lost to potential reuse. As of 2010, the in-use tellurium stock is estimated at 1.1 Gg, which mainly accumulated after 1990s with the increasing tellurium use in electronics, specifically photovoltaic and thermoelectric devices. Because tellurium is a byproduct of copper ores, its supply can be enhanced by more attention to recovery during processing of the copper parent. Tellurium can also, in principle, be recovered from end-of-life electronics; the increasing in-use stock indicates the potential for significant end-of-life recycling in the coming decades.