کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
10690489 1019254 2014 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
On the validity and improvement of the ultrasonic pulse-echo immersion technique to measure real attenuation
ترجمه فارسی عنوان
در مورد اعتبار و بهبود روش غوطه وری پالس اولتراسونیک برای اندازه گیری ضریب واقعی
ترجمه چکیده
یک فرض اساسی که در استفاده معمول از روش غوطه وری پالس اولواسونیک برای اندازه گیری کاهش در مواد جامد مورد پذیرش قرار می گیرد. فرضیه ذکر شده به چسبندگی کامل و غیر قابل تغییر در آب به نمونه نمونه متکی است، که شرایط لازم برای محاسبه ضریب انعکاس در هر رابط از تئوری انتشار موج است. سپس این پارامتر برای اصلاح سیگنال اندازه گیری شده و ضریب انقباض واقعی نمونه نمونه مورد بررسی قرار می گیرد. در این مقاله، مواردی که در آن وضعیت یقینا یکپارچگی راضی نیستند ارائه شده است. همچنین نشان داده شده است که در این موارد، تکرارپذیری شرایط در رابط همیشه نامشخص است. این بدان معنی است که ضرایب انعکاس ناشناخته است، حتی زمانی که دانسیته دانسته شده است. یک روش جدید به طور همزمان اندازه گیری ضریب انعکاس برای هر دو رابط در معرض قرارگرفته است که به مبدل طبیعی است و ضریب انقباض نمونه نمونه ای است که در اینجا ارائه شده است. استحکام روش جدید اثبات شده است، همانطور که نشان می دهیم که ارزش مناسب ضریب اطمینان به طور مستقل از شرایط مداوم متفاوتی از این موارد غیر ایده آل به دست می آید.
موضوعات مرتبط
مهندسی و علوم پایه فیزیک و نجوم آکوستیک و فرا صوت
چکیده انگلیسی
A fundamental assumption embraced in conventional use of the ultrasonic pulse-echo immersion technique to measure attenuation in solid materials is revisited. The cited assumption relies on perfect and immutable adhesion at the water to sample interface, a necessary condition that allows calculating the reflection coefficient at any interface from elastic wave propagation theory. This parameter is then used to correct the measured signal and obtain the real attenuation coefficient of the sample under scrutiny. In this paper, cases in which the perfectly cohesive interfacial condition is not satisfied are presented. It is shown also that in those cases, the repeatability of the conditions at the interface is always uncertain. This implies that the reflection coefficients are unknown, even when density is known. A new method of simultaneously measuring the reflection coefficients for both exposed interfaces that are normal to the transducer, and the attenuation coefficient of the specimen is developed and is presented here. The robustness of the new method is proven, as we demonstrate that the proper value of attenuation is achieved independently of the continuously varying interfacial conditions of these non-ideal cases.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ultrasonics - Volume 54, Issue 2, February 2014, Pages 544-550
نویسندگان
, ,