کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
11007191 | 1519220 | 2018 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Electrically assisted pressure joining of titanium alloys
ترجمه فارسی عنوان
اتصال الکتریکی به فشار از آلیاژهای تیتانیوم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
با فشار الکتریکی به هم پیوسته، آلیاژ تیتانیوم، قدرت مشترک، مشترک جامد،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
Electrically assisted pressure joining (EAPJ) of a Grade 1 titanium (Ti) alloy is experimentally investigated. In EAPJ, an electric current is directly applied to the specimen during plastic compression. Microstructural analysis shows that solid-state joints are successfully fabricated in the selected Ti alloy without melting. Shear tensile tests shows that the strength and fracture modes of the joint are strongly affected by a combination of the amount of plastic deformation (corresponding to a thickness reduction) and the electric current intensity. An optimal thickness reduction, corresponding to the maximum fracture load, exists for each value of current intensity, and decreases as current intensity increases. A higher fracture load can be obtained by adjusting the combination of the current intensity and the thickness reduction parameters.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Manufacturing Processes - Volume 35, October 2018, Pages 681-686
Journal: Journal of Manufacturing Processes - Volume 35, October 2018, Pages 681-686
نویسندگان
Yong-Fang Li, Hrishikesh Das, Sung-Tae Hong, Ju-Won Park, Heung Nam Han,