Detection of nanoparticles and components in smoke by time-of-flight mass spectrometry

A time-of-flight mass spectrometry (TOFMS) with a newly laboratory-made sampling cone interface fitted to an atmospheric pressure chemical ionization (APCI) positive ion source was successfully applied to easy, rapid on-line measurements of nanoparticles and components generated during combustion. The mass spectra for smoke from a mosquito coil ranged up to m/z 1202, corresponding to 1.2 nm with the carboneous material density as graphite 2.2 g cm−3. Typical m/z peaks were assigned to such synthetic pyrethroids, as d-allethrin and d-tetramethrin, at m/z 303 and 332, respectively. A specific pattern with a peak-to-peak interval of 74 was recognized in the higher mass range. The interval of 74 was confirmed by measuring with a standard silica solution in a positive ion mode using a conventional APCI interface under the same APCI conditions. The mass spectrum of the silica solution had a pattern with peak interval of 44 which was assigned to SiO. These results indicate that the pattern with an interval of 74 in the mass spectrum of the mosquito coil smoke is sample-derived peak. We assumed that the interval of m/z 74 is assigned to identified as triacetylene (1,3,5-hexatriyne) that is generated during the combustion.