Microstructure and mechanical properties of Mg-Zn-Mn-Sn-Nd wrought alloys

The microstructure and mechanical properties of as-cast and extruded Mg-6Zn-1Mn-4Sn-xNd (x=0, 0.5, 1.0, 1.5) alloys were investigated by means of optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM) and tensile test. The results showed that the dendrites sizes of these alloys were decreased by the addition of Nd. The phase compositions of the as-cast Mg-Zn-Mn-Sn-Nd alloys were dendritic α-Mg, MgZn2, Mg2Sn, T phase and MgSnNd ternary phase. The mechanical properties of the as-extruded alloys were improved due to the refined equiaxed grains and dispersive Mg2Sn and MgSnNd second phases. The comparison of the theoretical yield strength with the experimental yield strength revealed that the yield strength model of the as-extruded alloys should be modified as σys=σMg+σgb+σss+σsp.

The phase compositions of the s-cast Mg-Zn-Mn-Sn-Nd alloys were dendritic α-Mg, MgZn2, Mg2Sn, T phase and MgSnNd ternary phaseFigure optionsDownload as PowerPoint slide