Improved dehydrogenation cycle performance of the 1.1MgH2-2LiNH2-0.1LiBH4 system by addition of LaNi4.5Mn0.5 alloy

The isothermal desorption kinetics of the 1.1MgH2-2LiNH2-0.1LiBH4 system were improved by addition of LaNi4.5Mn0.5 alloy. The hydrogen desorption peak temperature of the sample containing LaNi4.5Mn0.5 reduced by approximately 5 K and the activation energy reduced by 9%. The results of isothermal dehydrogenation kinetics analysis implied that the isothermal desorption process at initial stage was controlled by the phase boundary mechanism. Moreover, the cycle performance of the materials was extended. The growth and agglomeration of the sample particles caused the deterioration of kinetics during de-/hydrogenation cycles, and then resulted in an incomplete desorption/absorption reaction which were responsible for the capacity fading. The cracking and pulverization of LaNi4.5Mn0.5 alloy had an obvious effect on preventing the composites aggregating, and the fine alloy particles could enhance the catalytic effect of the alloy, thus effectively offsetting part of the deterioration of kinetics caused by particles growth.

XRD patterns of the‥10 wt.% LaNi4.5Mn0.5 samples before and after dehydrogenation/hydrogenation cyclesFigure optionsDownload as PowerPoint slide