Degradation of dichlorvos using hydrodynamic cavitation based treatment strategies

The degradation of an aqueous solution of dichlorvos, a commonly used pesticide in India, has been systematically investigated using hydrodynamic cavitation reactor. All the experiments have been carried out using a 20 ppm solution of commercially available dichlorvos. The effect of important operating parameters such as inlet pressure (over a range 3–6 bar), temperature (31 °C, 36 °C and 39 °C) and pH (natural pH = 5.7 and acidic pH = 3) on the extent of degradation has been investigated initially. It has been observed that an optimum value of pressure gives maximum degradation whereas low temperature and pH of 3 are favorable. Intensification studies have been carried out using different additives such as hydrogen peroxide, carbon tetrachloride, and Fenton’s reagent. Use of hydrogen peroxide and carbon tetrachloride resulted in the enhancement of the extent of degradation at optimized conditions but significant enhancement was obtained with the combined use of hydrodynamic cavitation and Fenton’s chemistry. The maximum extent of degradation as obtained by using a combination of hydrodynamic cavitation and Fenton’s chemistry was 91.5% in 1 h of treatment time. The present work has conclusively established that hydrodynamic cavitation in combination with Fenton’s chemistry can be effectively used for the degradation of dichlorvos.

► First report of degradation of organophosphate pesticides using hydrodynamic cavitation.
► Optimum inlet pressure and lower operating temperatures favor degradation.
► Optimization of process intensifying parameters is required for maximizing the degradation.
► Combination of hydrodynamic cavitation with Fenton’s chemistry is the best treatment approach.