Effective removal of sulfur components from Brazilian power-coals by ultrasonication (40 kHz) in presence of H2O2

• Effect of ultrasonic energy in de-sulfurization of Brazilian power-coals is investigated.
• The removals of all the types of sulfur are observed in this process.
• Advance level characterization of the raw and ultrasonicated coals is reported.

The present investigation reports a preliminary attempt of using ultrasonic energy (40 kHz) to clean some low rank high sulfur Brazilian power-coal samples in presence of H2O2 solution. All types of sulfur components (i.e. pyritic, sulfate and organic) could be removed from the coal samples by this process. The raw and ultrasonicated coal samples were characterized by chemical analysis, Fourier Transformation Infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), focused ion beam (FIB), high-resolution transmission electron microscope (HR-TEM) with selected area electron diffraction (SAED) and/or microbeam diffraction (MBD), scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectrometer (EDS), and Thermogravimetry (TG-DTG) techniques to evaluate the clean-coal quality. The FT-IR spectroscopic analysis demonstrated the formation of oxidized sulfur species (SO and –SO2) and their subsequent removals after ultrasonication. The XRD profiles supported the presence of mineral matters in the coals. The TG-DTG profiles of the beneficiated coals revealed their improved quality for using in thermal plants with better combustion efficiency.