کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
13432028 1842586 2020 36 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A buck converter based on dual mode asynchronous pulse width modulator
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر شبکه های کامپیوتری و ارتباطات
پیش نمایش صفحه اول مقاله
A buck converter based on dual mode asynchronous pulse width modulator
چکیده انگلیسی
This paper presents a buck type DC-DC converter based on an asynchronous pulse width modulator (APWM). The proposed APWM is a self-oscillating circuitry which is composed of a binary comparator (BAPWM) and a distinctive digitally controlled delay cell. The oscillating frequency of the BAPWM can be tuned by the delay of the modulator loop. By increasing the delay of the modulator loop, the switching frequency decreases and the BAPWM can be reconfigured as a low frequency APWM (LFAPWM) modulator to meet the efficiency requirement at light loads. Also, to save the switching power consumption the high-side power switch size is scaled according to the load conditions. Since the carrier signal is internally generated by the APWM itself, there is no major concern about the ramp signal discontinuity which is make duty cycle disturbance. In addition to, from the point of view of the output spectrum, the proposed converter provides a better performance compared to the conventional PWM (CPWM) and PFM due to its noise shaping property. The proposed converter is designed and simulated in a 0.13-µm CMOS technology to convert an input voltage of 5 V to the output voltage of 2.5 V with the maximum load current of 1 A. The conversion efficiency with full loading range for the 2.5 V output voltage is higher than 85% whereas the peak efficiency is about 92%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: AEU - International Journal of Electronics and Communications - Volume 114, February 2020, 152998
نویسندگان
, , , ,