کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
143820 | 438914 | 2014 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Microwave absorbing behavior of metal dispersed TiO2 nanocomposites Microwave absorbing behavior of metal dispersed TiO2 nanocomposites](/preview/png/143820.png)
• Metal particles are dispersed in prepared TiO2 nanoparticles via milling process.
• Detailed study for the phase formation and morphology are performed.
• Microwave dielectric and absorption studies of nanocomposite are carried out.
• Enhancement in absorption is observed by the dispersion of metal particles.
Metal dispersed TiO2 nanocomposites were prepared by milling process. The microwave absorbing characteristics of the prepared nanocomposites with epoxy were studied in the 8.2–12.4 GHz frequency range for the microwave absorption application. The measured relative complex permittivity of metal dispersed nanocomposite-epoxy indicates higher values in comparison to the pure TiO2-epoxy nanocomposite. The Reflection loss (RL) values were calculated for thickness from 0.1 to 2.2 mm with an interval of 0.1 mm and the maximum value of RL found for TiO2-epoxy nanocomposite was −4.96 dB at 10.21 GHz frequency for 2.0 mm thickness. Whereas, RL value is improved to a maximum value of −13.67 dB at 10.13 GHz with Al dispersion (1.8 mm thickness) and −7.24 dB at 10.38 GHz with Ni dispersion (1.3 mm thickness). This study suggests the effectiveness metal particles dispersion for the development of thin microwave absorbers as well as increasing the level of RL.
Figure optionsDownload as PowerPoint slide
Journal: Advanced Powder Technology - Volume 25, Issue 2, March 2014, Pages 483–489