Numerical study to predict the particle deposition under the influence of operating forces on a tilted surface in the turbulent flow

This study uses a v2-f turbulence model with a two-phase Eulerian approach. The v2-f model can accurately calculate the near wall fluctuations in y-direction, which mainly represent the anisotropic nature of turbulent flow. The model performance is examined by comparing the rate of particle deposition on a vertical surface with the experimental and numerical data in a turbulent channel flow available in the literature. The effects of lift, turbophoretic, electrostatic and Brownian forces together with turbulent diffusion are examined on the particle deposition rate. The influence of the tilt angle and surface roughness on the particle deposition rate were investigated. The results show that, using the v2-f model predicts the rate of deposition with reasonable accuracy. It is observed that in high relaxation time the effect of lift force on the particle deposition is very important. It is also indicated that decreasing the tilt angle from 90° to 0° enhances the deposition rate especially for large size particles. Furthermore, the results show that increasing the Reynolds number at a specific tilt angle decreases the rate of particle deposition and the tilt angle has insignificant impact on the particle deposition rate in high shear velocity or high Reynolds number.