Alternative blended cement with ceramic residues: Corrosion resistance investigation on reinforced mortar

Blended cements are largely used for concrete: they are usually considered cements with a low environmental impact, as they require less clinker than ordinary Portland cement (OPC). Different constituents can be used as supplementary clinker component usually leading to cement with high resistance to outdoor environment. Polishing residue (PR), coming from porcelain stoneware tiles production, can be successfully used as new constituent for blended cement, however its action for enhancing the durability of cement matrix must be assessed. With this purpose, electrochemical tests (half cell potential, impressed voltage and linear polarization techniques) have been carried out on steel reinforced mortar samples, prepared using a 25% PR based cement and 100% OPC as binder and exposed to a 3.5% NaCl solution. The corrosion resistance results and microstructure analysis highlight better durability performances for PR based cement than those exhibited by OPC, mainly for curing time > 28 days.