Methods of obtaining pore solution from cement pastes and mortars for chloride analysis

Two techniques for the recovery of pore solution from cement mortars are examined: pore solution expression and miscible displacement using a high pressure permeameter. In the former, the pore solution is expressed from the mortar by crushing; in the latter, it is eluted from the mortar over 30 min by miscible displacement with water. Experimental results are presented for a range of cement pastes and mortars into which known amounts of chloride ion have been incorporated by using sodium chloride solution as the mix water. The results show that both eluted and expressed solutions exhibit a decrease in chloride ion concentration as the cement matrix ages, with the elution method showing a greater sensitivity to mix composition. Both methods show a decrease in chloride concentration as the water: cement ratio of the mix is increased. Overall, the high pressure elution method is capable of recovering a significantly higher proportion of the incorporated chloride. The application of these techniques to pore solution analysis is discussed.