Effect of Additive on Crystallization and Mechanical Properties of Polymer Blends of Poly(Lactic Acid) and Poly[(Butylene Succinate)-co-Adipate]

The effect of additive on crystallization and mechanical properties of poly(lactic acid) (PLA) and poly(butylene succinate-co-adipate) (PBSA) blend was studied. PLA and PBSA were blended in a twin screw extruder, which incorporated poly(butylene adipate-co-terephthalate) (PBAT) as an additive in PLA/PBSA blend. The ratio of PLA/PBSA was 80/20. The contents of PBAT were varied from 0 to 50 wt%. The thermal properties and crystallization behavior of PLA/PBSA/PBAT blends were analyzed by differential scanning calorimetry. The effect of PBAT contents on non-isothermal crystallization kinetic of the composites was investigated by using Avrami equation. Tensile strength and impact performance of the PLA/PBSA/PBAT blends decreased when increasing PBAT contents. It can be noted that the addition of 20 wt% PBAT showed the maximum impact performance of the PLA/PBSA blends.