CO2 capture into aqueous solutions of piperazine activated 2-amino-2-methyl-1-propanol

In this work, experimental data and a simplified vapor–liquid equilibrium (VLE) model for the absorption of CO2 into aqueous solutions of piperazine (PZ) activated 2-amino-2-methyl-1-propanol (AMP) are reported. The purpose of the work was to find the AMP/PZ system with the highest concentration and cyclic capacity, which could be used in the industry without forming solid precipitations at operational temperatures. The effect of the AMP/PZ ratio and the total concentration level of amine was studied. The highest possible ratio of AMP/PZ, which does not form solid precipitates during the absorption of CO2 at 40 °C (40 wt% amine), was identified. Considering the maximum loading found in the screening tests for AMP/PZ (3+1.5 M) and for 30 wt% MEA systems, the AMP/PZ system has about 128% higher specific cyclic capacity if operating between 40 and 80 °C, and almost twice the CO2 partial pressure at 120 °C compared to MEA.

► AMP/PZ system as effective CO2 capture agent.
► Selection of the best system based on characterization.
► Has about twice the specific cyclic capacity between 40 and 80 °C than 30 mass% MEA.