Experimental characterization and multi-scale modeling of mixing in static mixers. Part 2. Effect of viscosity and scale-up

Static micro-mixers are used in precipitation processes to avoid mixing limitations. The mixing performance of these mixers, which are used in this study to mix two streams of different viscosity, is characterized using competitive-parallel chemical reactions and computational fluid dynamics (CFD). This work is an extension of a previous paper where mixing of fluids with equal viscosity has been studied [Lindenberg, C., Schöll, J., Vicum, L., Brozio, J., Mazzotti, M., 2008. Experimental characterization and multi-scale modeling of mixing in static mixers. Chemical Engineering Science 63, 4135–4149]. It is found that the mixing performance in terms of reaction yield and mixing time decreases slightly with increasing viscosity ratio in a two jet vortex mixer (Roughton mixer). In the Y-mixer the trend is the same at low flow rates, but it is the opposite at large flow rates due to a symmetry breaking phenomenon. The Roughton mixer is scaled-up using the CFD model and a linear relationship between scale-up factor and mixing time is observed. Finally, it is shown that mixing times can be described satisfactorily as a function of velocity, jet diameter and viscosity.