کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
158271 | 457002 | 2007 | 11 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Determining the collision properties of semi-crystalline and amorphous thermoplastics for DEM simulations of solids transport in an extruder Determining the collision properties of semi-crystalline and amorphous thermoplastics for DEM simulations of solids transport in an extruder](/preview/png/158271.png)
To improve application of the distinct element method (DEM) to polymer processing applications it was necessary to evaluate the contact mechanics of a selection of commonly used polymers. The contact behaviors of high-density polyethylene (HDPE), polystyrene (PS) and polycarbonate (PC) were revealed in this paper from a series of impact studies where spherical polymeric particles struck a steel anvil at various angles of incidence and impact velocity. The coefficients of restitution and friction were calculated from high-speed video analysis of individual impacts. The collected data was used to evaluate the relevance of several popular normal contact force–displacement models to determine their suitability for the tested semi-crystalline and glassy polymers. The models considered were those proposed by Walton and Braun [1986. Viscosity, granular-temperature, and stress calculations for shearing assemblies of inelastic, frictional disks. Journal of Rheology 30, 949–980], with constant (WBCE) and variable (WBVE) normal restitution coefficient, and Thornton [1997. Coefficient of restitution for collinear collisions of elastic-perfectly plastic spheres. Journal of Applied Mechanics 64, 383–386], based on elastic–plastic collisions. Comparison of the impact data with DEM simulations using the various contact force–displacement models revealed that the WBVE model provides the best overall agreement with the viscoelastic-fully plastic behavior of HDPE, while the almost purely elastic nature of PC and PS agreed well with all three models studied in this paper. The influence of the normal force–displacement models on the solids transport zone of an extruder was subsequently discussed based on the findings from the impact study.
Journal: Chemical Engineering Science - Volume 62, Issue 14, July 2007, Pages 3699–3709